SWP-WRC3.1 paneli

  • €1.550,00
    Yksikköhinta kohti 
Sisältää veron. Toimituskulut lasketaan kassalla.


    Huom. FIA säännön mukaan ratin puolia ei saa muokata.
    Suunniteltu Sabelt 330 ALU ratille, jonka halkaisija 330 mm
    • 1 kpl CAN, Mbit/s, 2.0B
    • 120 Ω päätevastus
    • Oikosulkusuojaus
    • 1 kpl digitaalinen sisääntulo
    • Sisääntulovastus: 4.7 kΩ (5V pull-up)
    • Analogia anti aliasing filter
    • 12 kpl painonappeja, taustavalot ja 2 kpl LED valoja
    • Napin tila lähetetään CAN viestinä
    • 4 kpl kiertokytkimiä, tila lähetetään CAN viestinä
    • 2 kpl On–Off drivers
    • High side driver Vbattery, up to 1 A
    • Output voltage reread
    • Linear current limitation
    • Oikosulkusuoja
    • Ylikuorma ja lämpötila hälytys ja suoja
    • 2 kpl LED tilaväriä napeissa (punainen – vihreä)
    • Aktivointi CAN viesteinä
    • Kaikki LED velot voidaan määritellä napin asennosta riippumatta
    • LED valon kirkkaus määriteltävissä ohjelmalla
    • 6 kpl väri LED:ä kiertokytkimissä (8 kpl optionat)
    • LED värejä voidaan muokata tilauksesta
    • Näyteresoluution 10 bit
    • Lämpötila-alue: -40 / +120 °C
    • 2 kpl High side switch outputs voltage reread
    • Jännite partition 20 mV
    • Analogia anti aliasing filter
    • Symbolitarrat tilauksesta
    • Mitat: 
      • Johdon kanssa: 209 x 153 x 29 mm
      • Kiertokytkimien kanssa: 209 x 153 x 42 mm
    • Johto avoimilla päillä
    • Runko billet alumiini ja ABS kuori
    • IP65 vesitiivis
    • Paino 325 g

    Membrane Steering Wheel Panel

    Note! FIA regulation doesn't allow modification of steering wheel.

    Designed for Sabelt 330 mm steering wheel.

    1 CAN line
    • 1 Mbit/s throughtput data rate
    • 2.0B protocol
    • Software selectable 120 Ω terminator
    • Protection against short circuit to ground and battery

    1 Digital input for programming enable (ENCP)
    • Input resistance: 4.7 kΩ (5V pull-up)
    • Protection against short circuit to Vbattery.

    12 Keyboard buttons
    • With backlighting
    • With integrated 2 – color gauge LED
    • Button state transmitted on CAN

    4 Mechanical rotary switches
    • Compact design – PCB mounted
    • Switch state transmitted on CAN
    • Mechanical endless with electrical „smart stop“ feature
    • Number of positions adjustable by SW

    2 On–Off drivers
    • High side driver Vbattery, up to 1 A
    • Output voltage reread
    • Linear current limitation
    • Protection against short circuit to ground
    • Overload, over temperature feedback and protection

    12 Gauge LEDs
    • 2 color state (red – green)
    • Integrated in keyboard buttons
    • Activation received from CAN
    • Each LED controlled independently from button
    • LED color adjustable by SW within red – green scale
    • Brightness adjustable by SW

    4 Status Gauge LED at rotary groups
    • 6 single colour LEDs in each rotary group (8 optional on request)
    • Each LED group has its independent control – internally (by firmware)
    or via CAN
    • LED colors can be modified on request (HW modification)

    1 Internal temperature
    • Sampling resolution: 10 bits
    • Temperature range: -40 / +120 °C

    2 High side switch outputs voltage reread
    • Sampling resolution: 10 bits
    • Voltage partition 20 mV
    • Analogue anti aliasing filter

    Preliminary overall dimensions
    • With cable: 209 x 153 x 29 mm
    • Including rotary knobs: 209 x 153 x 42 mm
    • Connector: cable with free leads (colour coded)

    Enclosure
    • Machined aluminum / ABS cover
    • IP grade  IP65

    Weight (without steering wheel)
    • approx 325 g

    Panel mounting on steering wheel
    • Requirements on the mounting system (apart of fixing function)
    • maximum protection of panel when handling of the car
    • minimum added weight
    • simple steering column cable
    • quick mounting and dismounting from steering wheel (steering wheel arms cannot be modified - FIA WRC regulation)
    • Rear cover shaped to be centered on steering wheel – actually designed for Sabelt Ø330 mm and larger, can be adjusted on request.
    • Fixing on steering wheel by tie-rap fasteners

    Keyboard layouts, shape
    • Layouts (button colors and symbols) can be modified to the customer requirements
    • Standard layout is supplied with empty fields
    • Sticker set is supplied with SWP-WRC3.1. If required, stickers can be already placed on the membrane before delivered
    • Larger quantities can be supplied with graphics on membrane applied by seriography
    • Relief of buttons can be heighten by applying silicone caps on the top of the buttons (height upto cca 1.5 mm)