SWP-WRC3.3 paneli

  • €1.300,00
    Yksikköhinta kohti 
Sisältää veron. Toimituskulut lasketaan kassalla.


Huom. FIA säännön mukaan ratin puolia ei saa muokata.
  • Suunniteltu OMP 320 ALU ratille, jonka halkaisija 320 mm
  • 1 kpl CAN, Mbit/s, 2.0B
  • 120 Ω päätevastus
  • Oikosulkusuojaus
  • 1 kpl digitaalinen sisääntulo
  • Sisääntulovastus: 4.7 kΩ (5V pull-up)
  • 10 kpl painonappeja, taustavalot ja 2 kpl LED valoja
  • Napin tila lähetetään CAN viestinä
  • 2 kpl kiertokytkimiä, tila lähetetään CAN viestinä
  • 2 kpl On–Off drivers
  • High side driver Vbattery, up to 1 A
  • Output voltage reread
  • Linear current limitation
  • Oikosulkusuoja
  • Ylikuorma ja lämpötila hälytys ja suoja
  • 2 kpl LED tilaväriä napeissa (punainen – vihreä)
  • Aktivointi CAN viesteinä
  • Kaikki LED velot voidaan määritellä napin asennosta riippumatta
  • LED valon kirkkaus määriteltävissä ohjelmalla
  • 6 kpl väri LED:ä kiertokytkimissä
  • LED värejä voidaan muokata tilauksesta
  • Näyteresoluution 10 bit
  • Lämpötila-alue: -40 / +120 °C
  • 2 kpl High side switch outputs voltage reread
  • Jännite partition 20 mV
  • Analogia anti aliasing filter
  • Tarrat tilauksesta
  • Mitat: 
    • Johdon kanssa: 189 x 118 x 24 mm
    • Kiertokytkimien kanssa: 189 x 118 x 39 mm
  • Johto avoimilla päillä
  • Runko billet alumiini ja ABS kuori
  • IP54 roiskesuojattu
  • Paino 245 g

Membrane Steering Wheel Panel

Note! FIA regulation doesn't allow modification of steering wheel.

Designed for OMP 320 ALU steering wheel. Steering wheel diameter 320 mm.

1 CAN line
• 1 Mbit/s throughtput data rate
• 2.0B protocol
• Software selectable 120 Ω terminator
• Protection against short circuit to ground and battery

1 Digital input for programming enable (ENCP)
• Input resistance: 4.7 kΩ (5V pull-up)
• Protection against short circuit to Vbattery.

Upto 10 Keyboard buttons
• With backlighting
• With integrated 2 – color gauge LED
• Button state transmitted on CAN

2 Mechanical rotary switches
• Compact design – PCB mounted
• Switch state transmitted on CAN
• Mechanical endless with electrical „smart stop“ feature
• Number of positions adjustable by SW

2 On–Off drivers
• High side driver Vbattery, up to 1 A
• Output voltage reread
• Linear current limitation
• Protection against short circuit to ground
• Overload, over temperature feedback and protection

Upto 10 Gauge LEDs
• 2 color state (red – green)
• Integrated in keyboard buttons
• Activation received from CAN
• Each LED controlled independently from button
• LED color adjustable by SW within red – green scale
• Brightness adjustable by SW

2 Status Gauge LED groups at rotary switches
• 6 single colour LEDs at each rotary switch
• Each LED group has its independent control – internally (by firmware) or via CAN
• Position can be memorized at power off
• LED colors can be modified on request (HW modification)

1 Internal temperature
• Sampling resolution: 10 bits
• Temperature range: -40 / +120 °C

2 High side switch outputs voltage reread
• Sampling resolution: 10 bits
• Voltage partition 20 mV
• Analogue anti aliasing filter

Preliminary overall dimensions
• Without cable: 189 x 118 x 24 mm
• Including rotary knobs: 189 x 118 x 39 mm
• Connector: cable with free leads (colour coded)

Enclosure
• Machined aluminum / ABS cover
• IP grade  IP54

Weight (without steering wheel)
• approx 245 g

Panel mounting on steering wheel
• Requirements on the mounting system (apart of fixing function)
• maximum protection of panel when handling out of the car
• minimum added weight
• simple steering column cable
• steering wheel spokes cannot be modified - FIA regulation
• Rear cover shaped to be centered on steering wheel – designed for OMP 320 ALU with 320 mm diameter.
• Fixing on steering wheel by 3 bolts and support plate

Keyboard layout, shape
• Layout - button positions are optimised to be easilly
reachable with the thumb keeping the hand on handgrip
• Layout graphics is an integral part of the membrane applied by seriography
• Relief of buttons are heighten by applying silicone caps on the top of the buttons (height increase upto cca 1.5 mm)